When adding water to the Flex Connect it will be dispersed through all of your Flex Farm tanks. To efficiently add water, attach your hose from your RO Tank or tap into the end of the Return Line Drainage Assembly.
Before adding water to your Flex Connect ensure all of the ball valves on your Return & Supply Line Drainage Assemblies are closed (perpendicular to the line) and your Flex Farm Drainage Assembly Ball Valves are both open (parallel to the line). Your Pump Supply Line and Return Line Ball Valves also remain open.
Step 1: Connect your Garden Hose Quick Connect Adapter
Connect your Garden Hose Quick Connect Adapter to your source water hose.
Step 2: Connect your Source Water Hose to your Return Line Drainage Assembly
Connect your Source Water Hose to your Return Line Drainage Assembly.
Step 2: Open your Return Line Drainage Assembly Valve and turn on your Source Water
After connecting your source water hose you will open your Return Line Drainage Assembly Valve. Then you will turn on the water coming from your source. Your Flex Farm tanks will now be filling up with water.
Step 3: Monitor your Flex Farm Tanks until they are 1/2 full and turn off your Source Water
After your Flex Farm tanks are about 1/2 full, you will first turn off the flow of your source water. Then turn the valve at the end of your Return Line Drainage Assembly to the closed position and disconnect your hose. Congrats, you've filled your Flex Connect with water!
To turn on your water flow, proceed to the Priming your Flex Connect Pump Guide.